UltraViolet Devices High Output UV Device V-Flex Specifications

19-2021 Rev E, 06/05/07 1 V-Flex ® High Output UV Device INSTALLER/OWNER’S GUIDE Specifications subject to change without notice. ©Alt

19-2021 Rev E, 06/05/07 10 ELECTRICAL CONNECTION OF THE SYSTEM WARNING Personal Serious Injury Hazard Power supply can cause severe electrica

19-2021 Rev E, 06/05/07 11

19-2021 Rev E, 06/05/07 12 2. Insert the black V-Flex Clip into the module so that is holding the lamp in place and the clip is secured onto t

19-2021 Rev E, 06/05/07 13 WARNING UV Light Hazard Harmful to bare skin and eyes. Can cause temporary or permanent loss of vision. Never look

19-2021 Rev E, 06/05/07 14 CAUTION UV Lamp Burn Hazard Harmful to bare skin. Can cause severe burns. Disconnect power 15 minutes before remo

19-2021 Rev E, 06/05/07 15 3. Allow the lamp to cool for at least 15 minutes. 4. Depress lamp release button and remove lamp. Be careful not

19-2021 Rev E, 06/05/07 16 EQUIPMENT WARRANTY UltraViolet Devices, Inc. (UVDI), warrants to original Buyer for one year from the date of origi

19-2021 Rev E, 06/05/07 2 TABLE OF CONTENTS SPECIFICATIONS...

19-2021 Rev E, 06/05/07 3 SPECIFICATIONS Electrical Ratings Power Ratings Note: The V-Flex is a universal input circuit capable of operation

19-2021 Rev E, 06/05/07 4 APPLICATION When installed in forced air heating and cooling systems, the V-Flex kills airborne and surface microorg

19-2021 Rev E, 06/05/07 5 Never look at the lamps while illuminated. Only view illumination by way of view port accessory. To prevent exposur

19-2021 Rev E, 06/05/07 6 2. Determine the number and configuration of Lamp Modules and Power Junction Modules. Note: the maximum number of L

19-2021 Rev E, 06/05/07 7 8. Select one side of the Main Support to start assembly of lamp modules. Begin assembly of the Lamp Modules attachm

19-2021 Rev E, 06/05/07 8 20. After installation of the last Lamp Module on the side opposite of the Power Junction Module, route the power wire

19-2021 Rev E, 06/05/07 9 IMPORTANT It is a requirement to incorporate the wire raceway covering to all exposed portions of the wire race